Ricoh V-C3 Technical Training Manual page 414

Upper Relay Roller
Lower
Relay
Roller
Slide 414
# The slide shows the motors involved in paper feed from the trays.
$ The by-pass feed motor is not shown here. We will see it later.
# Each tray has a motor. The motor drives the pick-up, feed, separation, and grip
rollers at each station.
$ The grip roller pulls the paper out of the tray and feeds it into the vertical
transport path.
# Pick-up and feed timing is controlled by two solenoids in each tray, except in the
bypass tray, where there is a solenoid and a clutch.
Drive
! Motors
" Trays 1 to 3 - Three
paper feed motors,
one for each tray
" By-pass tray, and
upper relay roller -
By-pass feed motor
(not shown)
" Lower relay roller -
Lower relay motor
" Upper relay roller –
Bypass feed motor
414
V-C3 Training