Ricoh V-C3 Technical Training Manual page 152

When Registration Should Be Adjusted
Registration shift
is less than 2 mm:
Do not adjust
Registration shift
is more than 2 mm:
Adjust the machine
Registration shift
is more than 2 mm:
Adjust the machine
! If the error is more than ±2 mm, you should adjust the
machine.
! The order is not important, but if possible, adjust for
registration shift first, then for skew.
Slide 152
# LE: Leading edge
# TE: Trailing edge
To check for registration shift
# Look at the scale when the leading edge comes by and when the trailing edge
comes by. Check where the side edge of the paper is on the scale.
# If the side of the paper is within 2 mm of the central line on the scale, there is no
registration shift.
# If the side of the paper is more than 2 mm from the central line on the scale, you
should adjust the machine.
LT
LE/TE LE/TE
LE/TE LE/TE
]
LE/TE LE/TE
LE/TE LE/TE
LE/TE LE/TE
LE/TE LE/TE
152
A4
LE/TE LE/TE
LE/TE LE/TE
LE/TE LE/TE LE/TE LE/TE
LE/TE LE/TE
LE/TE LE/TE
V-C3 Training