Ricoh V-C3 Technical Training Manual page 363

! After you replace this part, you must apply lubricant.
! Apply a mixture of yellow toner (from the V-C1 series) and
lubricant powder, as explained in the service manual.
! The yellow toner must come from a bag of fresh toner, and
not from the toner supply port of a V-C1 series model. This
could contain developer, and will damage the drum and
ITB.
! DO NOT USE YELLOW TONER FROM THE V-C2 OR V-C3
SERIES. THIS CONTAINS CARRIER AND WILL DAMAGE
THE MACHINE.
! At the end of the procedure, do SP 2111-1.
Slide 363
The next few slides show how to apply the lubricant powder.
Lubricant Brush Roller Replacement
" Lubricant powder: Use Zinc Stearate (D0159501) for this
procedure, and for this procedure only.
363
V-C3 Training