Advertisement
! Install the items in the order shown on the previous slide.
Slide 129
Other units; install in any order
# Same as configuration 1, except for the punch option (different) and the jogger
option (built-in)
Configuration 2 - Notes
" 1. Copier
" 2. LCTs – install one of these.
» One is a new LCT that can handle larger and thicker paper.
» The other is an older A4/LT model. It requires an adapter for
installation on this machine. It also has an optional LG tray.
" 3. Copy tray – only if no finisher will be installed.
" 4. Cover Interposer – a finisher must be installed
» The cover interposer tray is installed on the folder, not the
finisher. So, the order of installation is different from
Configuration 1.
" 5. Folder – the B830 finisher must be installed
" 6. B830 finisher – a finisher adapter must also be installed
» 3000-sheet, corner stapling only, jogger built-in.
» Optional punch unit
129
V-C3 Training
Advertisement
