Ricoh V-C3 Technical Training Manual page 412

Slide 412
# The diagram shows the four built-in feed stations.
# There are no clutches. Each feed station has a motor.
# Note the locations of the following parts:
$ Feed/separation rollers (in trays 1, 2, and 3)
$ Grip rollers (in trays 1, 2, and 3) - these pull the paper out into the vertical
feed path
$ Vertical feed path - vertical transport rollers opposite the grip rollers
$ Lower relay roller - this is needed to feed paper between the 2nd and 1st
feed stations
$ Upper relay roller - this is needed to feed paper between the 1st feed
station and the registration roller
$ Registration roller
Overview
! Four trays
" Tray 1 - Tandem feed tray
(1550 x 2)
" Tray 2 - Universal tray
(550 sheets)
" Tray 3 - Universal tray
(550 sheets)
" Bypass tray - 100 sheets
! FRR feed system
! No size sensor in tray 1
412
V-C3 Training