Advertisement
! The machine cannot tell the difference between
certain original sizes, such as DLT (11" x 17")
and 11" x 15". The machine assumes such
originals are 11" x 17.
! To change this, use SP 6016 and SP 5126.
Slide 270
#
Changing the Default Selection with SP6016 and SP5126
Here is a list of paper sizes that can be set for the default to enable detection.
The bold sizes are the default settings, and the italic sizes are the alternate
settings.
North America
Bit
DLT SEF
6
Bit
LT LEF
5
Bit
LT SEF
4
Bit
LG SEF
3
To change the default settings:
1. Enter the SP mode.
2. Select SP6016.
On the screen you will see an 8-digit binary setting bar: 00000000
The default settings are all "0".
In North America, the size recognition is changed with Bits 6 to 3 (other bits
are ignored):
0
DLT SEF
1
11" x 15" SEF
In Europe, the size recognition is changed with Bits 2 to 0 (other bits are
ignored):
0
DLT SEF
1
8 Kai SEF
SP 5126
This SP controls the alternative paper sizes that are detected for LG SEF (USA)
or 8.5 x 13" (Europe/Asia).
Original Size Detection
11" x 15"
Bit 2 8 K
Exec LEF
Bit 1 16 K SEF
8" x 10" SEF
Bit 0 16 K LEF
Set by SP 5126
Bit6
Bit5
LT LEF
LT SEF
EXE LEF
8" x 10" SEF
Bit2
Bit1
LT SEF
LT LEF
16 Kai SEF
16 Kai LEF
270
Europe/Asia
DLT SEF
LT SEF
LT LEF
Bit4
Bit3
LG SEF
SP 5126
(default = F4 SEF)
Bit0
V-C3 Training
Advertisement
