Settings For Common Basic Functions; Inspection And Checking Before Operation - YASKAWA Σ-V Series User Manual

4 Operation

4.2.1 Inspection and Checking before Operation

4.2

Settings for Common Basic Functions

This section explains the settings for the common basic functions.

4.2.1 Inspection and Checking before Operation

To ensure safe and correct operation, inspect and check the following items before starting operation.
(1) Linear Servomotors
Inspect and check the following items and take appropriate measures before performing operation if any prob-
lem exists.
Are all wiring and connections correct?
•
• Are all nuts and bolts securely tightened?
Note: When performing operation on a linear servomotor that has been stored for a long period of time, perform the main-
tenance and inspection according to the procedures described in 1.7 Inspection and Maintenance.
(2) SERVOPACKs
Inspect and check the following items and take appropriate measures before performing operation if any prob-
lem exists.
Are all wiring and connections correct?
•
Is the correct power supply voltage being supplied to the SERVOPACK?
•
(3) Operating the Linear Servomotor Alone
JOG operation of the SERVOPACK enables checking linear servomotor operation using speed control without
connection to the host controller.
For details, refer to the
For details on how to perform operation using the Command Option Module functions, refer to the manual of
the connected Command Option Module.
4-4
Σ
-V Series Users Manual Setup Linear Motor (SIEP S800000 44).