YASKAWA Σ-V Series User Manual page 46

2 Panel Display and Operation of Digital Operator
2.3.3 Parameter Setting Methods
(2) Setting Method for Selection Parameters
The following example shows how to use application function selection switch 1 (Pn001) to change the setting
for the stopping method at servo OFF and alarm occurrence from stopping using DB (Pn001 = n.0000) to
stopping without DB (Pn001 = n.0002).
Step
1
2
3
4
5
6
7
8
2-6
Display after Operation Keys
Press the
Mode.
Press the
"Un."
Press the
Press the
the left of "=."
Press the
Press the
edge.
Press the
"n.0000" to "n.0002."
Press the
Description
Key to select the Parameter/Monitor
or Key to move the cursor to
or Key to change "Un" to "Pn."
Key three times to move the cursor to
Key to display "Pn001."
Key to move the cursor to the right
Key twice to change the setting of
Key to write the settings.