YASKAWA Σ-V Series User Manual page 144

5 Adjustments
5.1.3 Monitoring Analog Signals
(2) Setting Monitor Factor
The output voltages on analog monitor 1 and 2 are calculated by the following equations.
Analog monitor 1 output voltage = (-1)
Analog monitor 2 output voltage = (-1)
(3) Related Parameters
Use the following parameters to change the monitor factor and the offset.
Pn550
Pn551
Pn552
Pn553
5-6
×
×
Analog Monitor 1 Offset Voltage
Setting Range Setting Unit
-10000 to 10000
Analog Monitor 2 Offset Voltage
Setting Range Setting Unit
-10000 to 10000
Analog Monitor Magnification (×1)
Setting Range Setting Unit
-10000 to 10000
Analog Monitor Magnification (×1)
Setting Range Setting Unit
-10000 to 10000
×
Signal selection Multiplier
) (Pn552)
(Pn006=n.00
×
Signal selection Multiplier
(Pn553)
(Pn007=n.00
Speed
Factory Setting
0.1 V 0
Speed
Factory Setting
0.1 V 0
Speed
Factory Setting
0.01 times 100
Speed
Factory Setting
0.01 times 100
+ Offset voltage [V]
(Pn550)
+ Offset voltage [V]
(Pn551)
Position
Force
When Enabled
Immediately
Position
Force
When Enabled
Immediately
Position
Force
When Enabled
Immediately
Position
Force
When Enabled
Immediately
Classification
Setup
Classification
Setup
Classification
Setup
Classification
Setup