YASKAWA Σ-V Series User Manual page 293

Parameter
Name
No.
Input Signal Selection 1
4th 3rd 2nd
digit digit digit
n.
Pn50A
Setting
Range
0000 to FFF1
1st
digit
Reserved (Do not change.)
Reserved (Do not change.)
Reserved (Do not change.)
P-OT Signal Mapping
0 Valid when CN1-13 input signal is ON (L-level).
1
Valid when CN1-7 input signal is ON (L-level).
2 Valid when CN1-8 input signal is ON (L-level).
3 Valid when CN1-9 input signal is ON (L-level).
4 Valid when CN1-10 input signal is ON (L-level).
5
Valid when CN1-11 input signal is ON (L-level).
6 Valid when CN1-12 input signal is ON (L-level).
7 Forward run prohibited.
8 Forward run allowed.
9
Valid when CN1-13 input signal is OFF (H-level).
A Valid when CN1-7 input signal is OFF (H-level).
B Valid when CN1-8 input signal is OFF (H-level).
C Valid when CN1-9 input signal is OFF (H-level).
D
Valid when CN1-10 input signal is OFF (H-level).
E Valid when CN1-11 input signal is OFF (H-level).
F Valid when CN1-12 input signal is OFF (H-level).
Factory When
Units
Setting Enabled
− 1881 After restart
9.1 List of Parameters
Reference
Classification
Section
Setup −
(Refer to 4.2.3)
9-15
9