YASKAWA Σ-V Series User Manual page 300

9 Appendix
9.1.2 Parameters
Parameter
No.
Polarity Detection for Absolute Scale
Selection
4th
digit
n.
Pn587
Pn600
Regenerative Resistor Capacity
Pn601 Reserved (Do not change.)
Pn800 to
Reserved (Do not change.)
4
Pn95F
∗2. Normally set to "0." When using an external regenerative resistor, set the capacity (W) of the regenerative resistor.
∗3. The upper limit is the maximum output capacity (W) of the SERVOPACK.
∗4. For details on Pn800 to Pn95F, refer to the manual of the connected Command Option Module.
9-22
Name
0000 to 0001
3rd 2nd
1st
digit digit
digit
Polarity Detection for Absolute Scale Selection
0
Does not detect polarity.
1
Detects polarity.
Reserved (Do not change.)
Reserved (Do not change.)
Reserved (Do not change.)
∗2 SERVOPACK
Setting Factory
Units
Range Setting
−
0000
Depends on
10 W
∗3
Capacity
– –
– –
When Enabled Classification
Immediately Setup
0 Immediately Setup
0 –
0 –
Refer-
ence
Section
−
3.7.2
– –
– –