Chapter 8: Configuring The Ap 8120 Series; Configuring The Ap 8120 Series Access Points Using Wms - Avaya AP 8120 series Installation Instructions Manual

Chapter 8: Configuring the AP 8120 series

This chapter describes the procedures to configure an AP 8120 series access point after mounting and
installation.

Configuring the AP 8120 series access points using WMS

Use this workflow to configure the AP 8120 series access points using the WMS (Wireless
Management System) . For a complete list of procedures to configure the AP 8120 series using
the WMS, see the Avaya WLAN 8100 WC 8120 GUI Reference NN47251-108.
Before you begin
Ensure your AP 8120 model is properly installed and mounted as needed.
Procedure
1. Log into the WMS.
2. From the navigation tree in the left-hand panel, select Configuration, Policy,
3. Click Edit to edit an existing profile or, if no suitable network profile exists on the
4. Create a new network profile by configuring the fields in the General, Security, and
5. Click Update.
6. Select Configuration, Policy, Radio Profiles.
7. Click Add.
8. Configure the 2.4 GHz and 5 GHz radios for the AP 8120, AP 8120-E, or AP 8120-
9. Click Add.
10. Select Configuration, Policy, AP Profiles to create a new default AP Profile for
11. Click Add.
Avaya WLAN 8100 Installation – AP 8120 Series
Network Profiles .
WLAN already, click Add to add a new network profile for the new AP 8120, AP
8120-E, or AP 8120-O. A default Network Profile is associated if none is
specified.
QoS tabs.
The Access Radio Profile window opens showing the General tab.
O using the fields on the General, 802.11, Data Rates, Auto RF and QoS tabs.
the AP 8120, AP 8120-E, or AP 8120-O.
April 2012 71