Performing Advanced Configuration
Configuring the AP Using the HTTP/HTTPS Interface
Follow these steps to configure an Access Point's operating settings using the HTTP/HTTPS
interface:
1. Open a Web browser on a network computer.
Note:
The HTTP interface supports the following Web browser:
Note:
Microsoft Internet Explorer 6 with Service Pack 1 or later
●
Netscape 6.1 or later
●
2. If necessary, disable the Internet proxy settings. For Internet Explorer users, follow these
steps:
a. Select Tools > Internet Options....
b. Click the Connections tab.
c. Click LAN Settings....
d. If necessary, clear the Use a proxy server box.
e. Click OK twice to save your changes and return to Internet Explorer.
3. Enter the Access Point's IP address in the browser's Address field and press Enter.
Result: The Enter Network Password screen appears. See
Figure 20: Enter Network Password Screen
4. Enter the HTTP password in the Password field and click OK. Leave the User Name field
blank. (By default, the HTTP password is "public").
Result: The System Status screen appears.
5. Click the Configure button located on the left-hand side of the screen. See
62 Wireless AP-3 User's Guide
Figure
20.
Figure
21.