Configuring The Ap Using The Http/Https Interface - Avaya AP-3 User Manual

Configuring the AP Using the HTTP/HTTPS Interface

Detection (RAD)
VLAN and SSID pairs per wireless interface, and define the security
mode for each pair
• RADIUS: Configure RADIUS features such as RADIUS Access
Control and Accounting.
Configuring the AP Using the HTTP/HTTPS
Interface
Follow these steps to configure an Access Point's operating settings
using the HTTP/HTTPS interface:
1. Open a Web browser on a network computer.
NOTE:
The HTTP interface supports the following Web browser:
— Microsoft Internet Explorer 6 with Service Pack 1 or later
— Netscape 6.1 or later
2. If necessary, disable the Internet proxy settings. For Internet
Explorer users, follow these steps:
— Select Tools > Internet Options....
— Click the Connections tab.
— Click LAN Settings....
4-2
and define the Scan Interval. Configure up to 16
Avaya Wireless AP-3 User's Guide