Hdcp Setting (Output Port); Hdmi Mode Settings (Output Port); Color Space Setting (Output Port); Tps Mode Settings - Lightware UMX-TPS-TX120 User Manual


  
7. LW3 Programmers' Reference
7.6.23. HDCP Setting (Output Port)
HDCP capability can be set to Auto/Always on the output ports, thus, non-encrypted content can be
transmitted to a non-HDCP compliant display. See more information in the
Command and Response #hdcp
SET·/MEDIA/VIDEO/<out>.HdcpModeSetting=<HDCP_mode>
ç
pw·/MEDIA/VIDEO/<out>.HdcpModeSetting=<HDCP_mode>
æ
Parameters
Identifier Parameter description
<HDCP_mode> HDCP mode
Example
ç SET /MEDIA/VIDEO/O1.HdcpModeSetting=0
æ pw /MEDIA/VIDEO/O1.HdcpModeSetting=0
7.6.24. HDMI Mode Settings (Output Port)
Command and Response
SET·/MEDIA/VIDEO/<out>.HdmiModeSetting=<mode>
ç
pw·/MEDIA/VIDEO/<out>.HdmiModeSetting=<mode>
æ
Parameters
Identifier Parameter description
<mode> HDMI mode
Example
ç SET /MEDIA/VIDEO/O1.HdmiModeSetting=2
æ pw /MEDIA/VIDEO/O1.HdmiModeSetting=2
HDCP Management section.
Value Parameter value
0 Auto
1 Always
Value Parameter value
0 Auto
1 DVI
2 HDMI 24 bit
3 HDMI 30 bit
4 HDMI 36 bit
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
7.6.25. Color Space Setting (Output Port)
Command and Response #colorspace
SET·/MEDIA/VIDEO/<out>.ColorSpaceSetting=<colorspace>
ç
pw·/MEDIA/VIDEO/<out>.ColorSpaceSetting=<colorspace>
æ
Parameters
Identifier Parameter description
<colorspace> Color space conversion
Example
ç SET /MEDIA/VIDEO/O1.ColorSpaceSetting=2
æ pw /MEDIA/VIDEO/O1.ColorSpaceSetting=2
7.6.26. TPS Mode Settings
Command and Response #tpsmode
SET·/REMOTE/<port>.tpsModeSetting=<tps_mode>
ç
pw·/REMOTE/<port>.tpsModeSetting=<tps_mode>
æ
Parameters
Identifier Parameter description
<mode>
INFO:
See more information about TPS modes in the
Example
ç SET /REMOTE/S1.tpsModeSetting=A
æ pw /REMOTE/S1.tpsModeSetting=A
INFO:
Use the GET command
Value Parameter value
0 Auto
1 RGB
2 YCbCr 4:4:4
3 YCbCr 4:2:2
Value Parameter value
A Auto
H HDBaseT
TPS mode L Long reach
1 LPPF1
2 LPPF2
TPS Interface section.
to query the parameter.
110