Rear Panel Leds - Lightware UMX-TPS-TX120 User Manual


  
2. Product Overview
Firmware Version Indication
After being powered on, the transmitter lights up all LEDs, then displays its firmware version using three
LEDs on the front panel: the upper three in the left column. The top LED means the first number of the
firmware version – actually this is the main version. The second and the third LEDs from the top indicate the
second and the third numbers of the firmware version which mean the subversions.
VGA Audio1 HDCP
HDMI HDMI Autoselect
DP DP DVI-A Video
DVI-D DVI-D Audio2
VIDEO AUDIO
1.3.2
INPUT STATUS
UMX-TPS-TX140
Example - WP-UMX-TPS-TX130-US
The process after the device is switched on or rebooted is the following:
Step 1. VGA LED blinks once the first number (1).
Step 2. DP LED blinks twice the second number (2).
Step 3. HDMI LED stays dark showing the third number (0).
#firmwareversion
INPUT STATUS
VGA AUDIO
DP DP
HDMI HDMI
Autoselect TPS LINK
1.4.0 VIDEO AUDIO
WP-UMX-TPS-TX130-US
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
2.7. Rear Panel LEDs
LIVE LED
off
blinking (slow)
green
blinking (fast)
green
on
green
RS-232 LED
off
blinking
green
on
green
SRVC LED *
on
green
USB KVM LED *
off
on
green
LINK LED
off
blinking (slow)
green
blinking (fast)
green
on
green
*
Only the UMX-TPS-TX140K model has USB KVM LED, but it does not contain SRVC LED.
#status
The device is not powered.
The device is powered and operational.
The device is in firmware update (bootload) mode.
The device is powered but not operational.
RS-232 ports (Local and Link) are in Passthrough mode.
Command injection mode is active.
RS-232 ports (Local and Link) are in Control mode.
Test pattern is the selected and active input source.
No USB link between the transmitter and the controlled device
(e.g. PC).
The USB is enumerated.
No TPS link between the transmitter and the receiver.
Low power mode is active.
Ethernet fallback mode is active.
TPS link is established, HDBaseT or Long Reach mode is active.
21