Restore; Package Options - Lightware UMX-TPS-TX120 User Manual


  
8. Firmware Update
8.6.6. Restore
Restores device configuration from a backup file.
TIPS AND TRICKS:
This command can be used for uploading a configuration to numerous devices (aka
Configuration cloning by CLI).
Command
LightwareDeviceUpdaterV2_CLI.cmd restore [options]
Options
Option
-i or --ip List of IP addresses of devices to be updated
-n or --hostName List of host names of devices to be updated
-b or --backupFile The path of the configuration backup file
Do not override the network settings of the device with the ones
in the backup file. It comes in handy when multiple devices'
-k or --keepOriginalIp
configuration is being restored from a single backup file.
Default: false
ATTENTION!
The configuration is restored automatically if the factory default option is not applied in the
update command.In that case, there is no need to run the restore command after the update.
Example
C:\Program Files (x86)\Lightware\Lightware Device Updater V2>LightwareDeviceUpdaterV2_CLI.cmd restore --ip
192.168.1.14 --backupFile c:\My_backup\backup_UMX_TPS_TX140K_SN00006363.lw3 --keepOriginalIp
C:\Program Files (x86)\Lightware\Lightware Device Updater V2>lib\jre\bin\java.exe -jar lib\ldu2.jar restore --ip
192.168.1.14 --backupFile c:\My_backup\backup_UMX_TPS_TX140K_SN00006363.lw3 --keepOriginalIp
[2021-05-14 14:11:04.631] [ INFO] [
[2021-05-14 14:11:04.645] [ INFO] [

INFO: The firmware package checks the backup data before the restore procedure and if it is necessary,
a conversion is applied to avoid incompatibility problems between the firmware versions. In that case,
two backup files are created: the original and a new one with "_converted" suffix. Using the last one for
restoring is recommended.
Description
one of them is
main] - Executing configuration restore...
main] - Device IPs: [192.168.1.14]
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
8.6.7. Package Options
Shows package-specific update options.
Command
LightwareDeviceUpdaterV2_CLI.cmd packageOptions [options]
Options
Option
-p or --package
Required?
Example
C:\Program Files (x86)\Lightware\Lightware Device Updater V2>LightwareDeviceUpdaterV2_CLI.cmd packageOptions
mandatory
--package c:\Firmwares\umx-tps-tx100_v1.5.0b4.lfp2
yes
C:\Program Files (x86)\Lightware\Lightware Device Updater V2>lib\jre\bin\java.exe -jar lib\ldu2.jar packageOptions
--package c:\Firmwares\umx-tps-tx100_v1.5.0b4.lfp2
optional
Backup and restore options:
--skipPresetsAtRestore : if true, device presets will not be restored. (Default: false)
--uploadDefaultMiniWeb : if true and no custom miniweb is present on the device, the default built-in
miniweb will be uploaded to the device. (Default: false)
Login options:
--clearTextLoginPw : The cleartext login password used when updating devices. (Default: empty string)
Test options:
--test : if true, no update will be performed, communication with the device will be tested. (Default:
false)
C:\Program Files (x86)\Lightware\Lightware Device Updater V2>
Package option example can be seen in the following section.
Description
The path of the firmware package file
155
Required?
yes