Change The Subnet Mask (Static); Change The Gateway Address (Static); Apply Network Settings; Ethernet Tool Kit - Lightware UMX-TPS-TX120 User Manual


  
7. LW3 Programmers' Reference
7.12.3. Change the Subnet Mask (Static)
Command and Response #ipaddress
SET·/MANAGEMENT/NETWORK.StaticNetworkMask=<netmask>
ç
pw·/MANAGEMENT/NETWORK.StaticNetworkMask=<netmask>
æ
Example
ç SET /MANAGEMENT/NETWORK.StaticNetworkMask=255.255.255.0
æ pw /MANAGEMENT/NETWORK.StaticNetworkMask=255.255.255.0
ç CALL /MANAGEMENT/NETWORK:applySettings(1)
æ mO /MANAGEMENT/NETWORK:applySettings
INFO:
The applySettings method will save and apply the new value and results the device to reboot.

INFO: The current setting can be queried by using the
7.12.4. Change the Gateway Address (Static)
Command and Response
SET·/MANAGEMENT/NETWORK.StaticGatewayAddress=<gw_address>
ç
pw·/MANAGEMENT/NETWORK.StaticGatewayAddress=<gw_address>
æ
Example
ç SET /MANAGEMENT/NETWORK.StaticGatewayAddress=192.168.0.5
æ pw /MANAGEMENT/NETWORK.StaticGatewayAddress=192.168.0.5
ç CALL /MANAGEMENT/NETWORK:applySettings(1)
æ mO /MANAGEMENT/NETWORK:applySettings

INFO: The applySettings method will save and apply the new value and results the extender to reboot.

INFO: The current setting can be queried by using the
7.12.5. Apply Network Settings
Command and Response
ç CALL·/MANAGEMENT/NETWORK:ApplySettings(1)
æ m0·/MANAGEMENT/NETWORK:ApplySettings
Example
ç CALL /MANAGEMENT/NETWORK:ApplySettings(1)
æ m0 /MANAGEMENT/NETWORK:ApplySettings
All network settings which are changed have been applied and network interface restarts.
GET command.
GET command.
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
7.13. Ethernet Tool Kit
7.13.1. Device Filter Based on MAC Address
DIFFERENCE:
This feature is available only in UMX-TPS-TX140K and TX140-Plus models from FW
package v1.5.0b4.
You can create a list of network devices based on the MAC address which are allowed controlling the device,
or querying parameters to/from the Lightware device.
ATTENTION!
If the device is installed in a network where it gets IP address from a DHCP server and you
plan to use the MAC filtering, make sure the MAC address of the DHCP server is added to the white list.
Otherwise, the device will not get IP address and will be unreachable.
Command and Response
SET·/MANAGEMENT/MACFILTER.MACaddress<loc>=<MAC_address>;<receive>;<send>;<name>
ç
pw·/MANAGEMENT/MACFILTER.MACaddress<loc>=<MAC_address>;<receive>;<send>;<name>
æ
The filter is disabled as default. Set the FilterEnable property to true as shown in the example.
Parameters
Parameter Parameter description
<loc> Location of the address
<MAC_address> The MAC address of the
device
<receive> Enable/disable the
parameter querying option
<send> Enable/disable the
parameter setting option
<name> Unique name for the better
identification (optional)
Example
ç SET /MANAGEMENT/MACFILTER/MACaddress4=(04:D4:C4:4D:01:43;1;1;Tech)
æ pw /MANAGEMENT/MACFILTER/MACaddress4=(04:D4:C4:4D:01:43;1;1;Tech)
ç SET /MANAGEMENT/MACFILTER.FilterEnable=true
æ pw /MANAGEMENT/MACFILTER.FilterEnable=true
New MAC address is saved into the 4th property with name 'Tech', which may query/set parameters from/in
the Lightware device. The FilterEnable property is set to true, thus, the filter is enabled.
#macfilter
Values Value description
The default values of 1, 2 and 3 ensure that
1-8
address resolution and device discovery
continue to work after enabling the MAC
filter
Unique value Hex format, divided by a colon
false (or 0) The device is not allowed to query
parameters from the LW device
true (or 1) The device is allowed to query parameters
from the LW device
false (or 0) The device is not allowed to change
parameters in the LW device
true (or 1) The device is allowed to change parameters
in the LW device
Any string Up to 5 ASCII characters (longer names
are truncated)
123