Lightware UMX-TPS-TX120 User Manual page 97


  
6. LW2 Programmer's Reference
RS-232 Settings
RS-232 Mode Setting
ȩ {RS232=<mode>}
RS-232 Parameters Settings
ȩ {RS232_LOCAL_FORMAT=<BaudRate>;<DataBit>;<Parity>;<StopBit>}
RS-232 Control Protocol Port Setting
ȩ {RS232_LOCAL_PROT=<protocol>}
Serial Port Format Setting (Link port)
ȩ {RS232_LINK_FORMAT=<baud_rate>;<data_bit>;<parity>;<stop_bit>}
Serial Port Protocol Setting (Link port)
ȩ {RS232_LINK_PROT=<protocol>}
GPIO Port Configuration
Setting the Level and Direction for Each Pins
ȩ {GPIO<pin_nr>=<dir>;<level>}
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual 97