Frame Detector; Edid Menu - Lightware UMX-TPS-TX120 User Manual


  
5. Software Control - Lightware Device Controller
5.7.3. Frame Detector
The ports can show detailed information about the signal like full size and active video resolution. This
feature is a good troubleshooter if compatibility problems occur during system installation. To access this
function, open the port properties window and click on Frame detector button.
Lightware's Frame Detector function works like a signal analyzer and makes possible to determine the exact
video format that is present on the port, thus helps to identify many problems. E.g. actual timing parameters
may differ from the expected and this may cause some displays to drop the picture.
Frame Detector measures detailed timings on the video signals just like a built-in oscilloscope, but it is
much more easy to use. Actual display area shows the active video size (light grey). Dark grey area of the
full frame is the blanking interval which can contain the info frames and embedded audio data for HDMI
signals. Shown values are measured actually on the signal and not retrieved only from the HDMI info frames.
Frame detector window
#framedetector
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
5.8. EDID Menu
Advanced EDID Management can be accessed by selecting the EDID menu. There are two panels: left one
contains Source EDIDs, right one contains Destination places where the EDIDs can be emulated or copied.
Control Buttons
Exporting an EDID (save to a
file)
Importing an EDID (load from
a file)
Display EDID Summary
window
Opening Advanced EDID
Editor with the selected EDID
Opening Easy EDID Creator

EDID menu

Transfer button: executing
EDID emulation or copying
Deleting EDID (from User
memory)
Selecting all memory places
in the right panel
Selecting none of the memory
places in the right panel
#edid
62