Running The Software; Ldu2 Interfaces - Lightware UMX-TPS-TX120 User Manual


  
8. Firmware Update
8.3. Running the Software
You have two options:
▪ Starting the LDU2 by double-clicking on the shortcut/program file, or
Double-clicking on an LFP2 file.
▪
8.3.1. LDU2 Interfaces
The software can be used over:
▪ The Graphical User Interface (GUI), or by
▪ The Command Line Interface (CLI).
LDU2 Auto-Update
At startup, the software checks if a newer version is available on the web.
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
Main Screen
When the software is started by the shortcut, the device discovery screen appears.
Press the Search for devices button to start finding the Lightware devices:
If you start the software by double-clicking on the LFP2 file, the firmware will be loaded. Press the Discover devices
button; all the devices will be listed which are compatible with the selected firmware pack.

INFO: If you press the Choose package file button, the release notes of the LFP2 file will be displayed in the right
panel; see the Step 1. Select the Firmware Package.
DISCOVER DEVICES
section.
149