Lightware UMX-TPS-TX120 User Manual page 143


  
7. LW3 Programmers' Reference
Setting an Action by Specifying a Direct Path
SET·/EVENTS/E<loc>.Action=<expression>
ç
Setting an Action by Linking Another Action
SET·/EVENTS/E<loc>.Action=<event_nr>
ç
Setting an Action by Linking a Macro
SET·/EVENTS/E<loc>.Action=<macro_name>
ç
Event Manager Tool Kit
Setting the Delay
SET·/EVENTS/E<loc>.ConditionTimeout=<time>
ç
SET·/EVENTS/E<loc>.ConditionEndCheck=<true/false>
ç
SET·/EVENTS/E<loc>.ConditionTimeoutContinuous=<true/false>
ç
Setting the Name of the Event
SET·/EVENTS/E<loc>.Name=<string>
ç
Enable the Event
SET·/EVENTS/E<loc>.Enabled=<true/false>
ç
Triggering a Condition
ç CALL·/EVENTS/E<loc>:triggerCondition(1)
Querying the Condition Counter
ç GET·/EVENTS/E<loc>.ConditionCount
Querying the Condition Trigger Counter
ç GET·/EVENTS/E<loc>.ExternalConditionTriggerCount
Testing an Action
ç CALL·/EVENTS/E<loc>:ActionTest(1)
Variable-Management
Value Assignment
SET·/CTRL/VARS/V<loc>.Value=<value>
ç
Addition and Subtraction (Add Method)
ç CALL·/CTRL/VARS/V<loc>:add(<operand>;<min>;<max>)
Addition and Subtraction (Cycle Method)
ç CALL·/CTRL/VARS/V<loc>:cycle(<operand>;<min>;<max>)
Value Change with Intervals (Case)
CALL·/CTRL/VARS/V<loc>:case(<min> <max>
ç
<val>;)
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
Scan and Store
ç CALL·/CTRL/VARS/V<loc>:scanf(<path>.<property>;<pattern>)
Reformatting a Value
ç CALL·/CTRL/VARS/V<loc>:printf(<prefix>%s<postfix>)
Ethernet Port Configuration
Set the DHCP State
SET·/MANAGEMENT/NETWORK.DhcpEnabled=<dhcp_status>
ç
Change the IP Address (Static)
SET·/MANAGEMENT/NETWORK.StaticIpAddress=<IP_address>
ç
Change the Subnet Mask (Static)
SET·/MANAGEMENT/NETWORK.StaticNetworkMask=<netmask>
ç
Change the Gateway Address (Static)
SET·/MANAGEMENT/NETWORK.StaticGatewayAddress=<gw_address>
ç
Apply Network Settings
ç CALL·/MANAGEMENT/NETWORK:ApplySettings(1)
Ethernet Tool Kit
Device Filter Based on MAC Address
SET·/MANAGEMENT/MACFILTER.MACaddress<loc>=<MAC_address>;<receive>;<send>;<na
ç
me>
LW2 Control Port Blocking
SET·/MANAGEMENT/SERVICEFILTER.Lw2Enabled=<port_mode>
ç
HTTP Port Blocking
SET·/MANAGEMENT/SERVICEFILTER.HttpEnabled=<port_mode>
ç
HTTP Post Receiving Blocking
SET·/MANAGEMENT/SERVICEFILTER.HttpEnabled=<port_mode>
ç
Powering on a Computer over Ethernet (Wake-on-LAN)
ç CALL·/MEDIA/ETHERNET:wakeOnLan(MAC_address)
Setting the Host Name
SET·/MANAGEMENT/NETWORK.HostName=<unique_name>
ç
Ethernet Message Sending
Sending a TCP Message (ASCII-format)
ç CALL·/MEDIA/ETHERNET:tcpMessage(<IP_address>:<port_no>=<message>)
143