Lightware UMX-TPS-TX120 User Manual page 31


  
3. Installation
Mounting Steps - FP-UMX-TPS GES4 / GES9 Kits
The FP-UMX-TPS GES4 / GES9 kits can be ordered separately, please contact sales@lightware.com.
Dimensions of the Brackets
The following drawing and table represents the dimensions of the Lightware brackets assembled with the
transmitter unit. The two types of GES bracket pairs have different dimensions. The values are in mm.
L
GES-4 / GES-9
bracket pair
FP-UMX-TPS-TX100
series transmitter
H
W
Mounting Steps
Step 1. Place the two half of the brackets of GES4 / GES9 to the floor box. Hook up the upper ears of the
brackets to the top mounting slot.
Parameter LW GES-4 LW GES-9
H 53.4 53.4
L 174.1 216.1
W 76 76
GES4/GES7 GES9
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
Step 2. Place the transmitter to the brackets.
Step 3. Fasten the all four M3x6 PH fixing screws to fix the device to the brackets.
31