Lightware UMX-TPS-TX120 User Manual page 73


  
5. Software Control - Lightware Device Controller
Scan and Store
This tool can be used to get the value (or a part) of an LW3 property. The defined path will be checked
according to the pattern and the result will be saved into the variable (number or string type). Press the ?
button to open the pattern options:
Pattern
%s String of characters stopping at the first whitespace character
%<number>s The next <number>
%c One character
%<number>c The next <number>
%[<characters>] Defined character set, specified between brackets
%[^<characters>] Negated character set, specified between brackets which will be skipped
%* Ignored part
<custom_text> User-defined text
Examples
Node Path
1
/MANAGEMENT/STATUS.CpuTemperature 32 C; 0;75; 0;79;21;34;
/MANAGEMENT/STATUS.CpuFirmware
/MEDIA/VIDEO/I6.Resolution
/MEDIA/UART/P1.Rs232Configuration
/MEDIA/AUDIO/XP.SourcePortStatus
/MEDIA/VIDEO/I6.Resolution
/MANAGEMENT/NETWORK.HostName
defined by the user
1
Reformat
The value of the variable can be changed by adding text as prefix and/or postfix. Type %s to indicate where
to insert the original value.
Example
Original value: 3
▪
▪ Pattern: input%s
▪ Modified value: input3
Pattern description
of characters (string) stopping at the first whitespace
of characters
Property Value Pattern
1
%s
1.3.0b0 r1 %12s
640x480p60 %3c
57600, 8N1 %*[^,], %s
T000A;T000A;T0008;T000A;T000C %*6c%5c T000A
640x480p60 %[^b]%*
lightware-00005031 lightware-
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
Scanned
result
32
1.3.0b0
640
8N1
640
00005031
73