Lightware UMX-TPS-TX120 User Manual page 27


  
3. Installation
Step 5. Insert the bracket into the frame.
Step 6. Move the handles towards the frame. Align the tab on the assembly with the top slot in the frame.
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
Step 7. Fasten the fixing screws to fix the device into the floor box frame.
Step 8. Place the transmitter to the bracket.
Step 9. Fasten the all four M3x6 PH fixing screws to fix the device to the bracket.
27