7. LW3 Programmers' Reference
7
L W3 Programmers' Reference
The device can be controlled through Lightware 3 (LW3) protocol commands to ensure the compatibility with other
Lightware products. The supported LW3 commands are described in this chapter.
ç Overview
ç Instructions for the Terminal Application Usage
ç Protocol Rules
ç System Commands
ç Cleartext Login Protection
ç Video Port Settings
ç Audio Port Settings
ç Analog Audio Input Level Settings
ç Event Manager Basics
ç Event Manager Tool Kit
ç Variable-Management
ç Ethernet Port Configuration
ç Ethernet Tool Kit
ç Ethernet Message Sending
ç HTTP Messaging
ç TCP Message Recognizer
ç RS-232 Port Configuration
ç RS-232 Message Sending
ç RS-232 Message Recognizer
ç Sending CEC Commands
ç Infrared Port Configuration
ç Infrared Message Sending
ç GPIO Port Configuration
ç EDID Management
ç LW3 Commands - Quick Summary
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
98