Query The Video Autoselect Settings; Change The Autoselect Mode; Query The Input Port Priority; Change The Input Port Priority - Lightware UMX-TPS-TX120 User Manual


  
7. LW3 Programmers' Reference
7.6.7. Query the Video Autoselect Settings
Command and Response
ç GET·/MEDIA/VIDEO/XP.DestinationPortAutoselect
pr·/MEDIA/VIDEO/XP.DestinationPortAutoselect=<out1_set>;<out2_set>;<...>;<out#_set>
æ
Parameters
Identifier Parameter description
Two-letter code of the
Autoselect settings – 1
<out#_set>
Two-letter code of the
Autoselect settings – 2
Example
ç GET /MEDIA/VIDEO/XP.DestinationPortAutoselect
æ pr /MEDIA/VIDEO/XP.DestinationPortAutoselect=EL
Explanation
The response shows the settings of each output one by one. EL: the Autoselect is Enabled on output, selected
mode is Last detect. For more details see
7.6.8. Change the Autoselect Mode
Command and Response #autoselect
ç CALL·/MEDIA/VIDEO/XP:setDestinationPortAutoselect(<out1_set>;<out2_set>;<...>;<out#_set>)
æ mO·/MEDIA/VIDEO/XP.setDestinationPortAutoselect
Parameters
See the previous section.
Example 1
ç CALL /MEDIA/VIDEO/XP:setDestinationPortAutoselect(O1:EP)
æ mO /MEDIA/VIDEO/XP:setDestinationPortAutoselect
The setting is changed to EP: Autoselect is enabled (E); the mode is set to priority detect (P).
Example 2
ç CALL /MEDIA/VIDEO/XP:setDestinationPortAutoselect(O1:D)
æ mO /MEDIA/VIDEO/XP:setDestinationPortAutoselect
The setting is changed to DPM: Autoselect is disabled (D). The other settings remain unchanged. Since the
outputs are linked, the change will affect local and link out.
Value Parameter value
E Autoselect is enabled.
letter
st
D Autoselect is disabled.
F First detect: the first active video input is selected.
Priority detect: always the highest priority active
P
video input will be selected.
letter
nd
Last detect: always the last attached input is
L
switched to the output automatically.
The Autoselect Feature section.
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
7.6.9. Query the Input Port Priority
Command and Response
ç GET·/MEDIA/VIDEO/XP.PortPriorityList
æ pr·/MEDIA/VIDEO/XP.PortPrioirtyList=
The response shows the priority of each output one after another. The priority number can be from 0 to 31;
0 is the highest- and 30 is the lowest priority. 31 means that the port will be skipped from the priority list.
Parameters
<out#_list> The input port priority order of the given output port: <in1>,<in2>,<...>,<in>
Example
ç GET /MEDIA/VIDEO/XP.PortPriorityList
æ pr /MEDIA/VIDEO/XP.PortPriorityList=0,1,2,3,4,5
Parameters
Video input port
Priority
Highest priority is assigned to I1 port.
ATTENTION!
The same priority number can be set to different input ports. When the priority numbers
match, the input port with the lowest port number will have the highest priority.
7.6.10. Change the Input Port Priority
Command and Response
ç CALL·/MEDIA/VIDEO/XP:setAutoselectionPriority (<in>\(<out>\):<prio>);(<in>\(<out>\):<prio>)
æ mO·/MEDIA/VIDEO/XP:setAutoselectionPrioirty
Parameters
The <prio> parameter is the Priority number from 0 to 31, equal numbers are allowed (31 means that the port
will be skipped from the priority list). An input port priority can be set on an output port. Many settings can
be executed by separating a semicolon (no space), see the example below.
Example
ç CALL /MEDIA/VIDEO/XP:setAutoselectionPriority(I1\(O1\):4;I2\(O1\):4)
æ mO /MEDIA/VIDEO/XP:setAutoselectionPriority
Explanation
The priority number of input 1 and Input 2 has been set to 4 on output 1. The example shows that certain
control characters have been escaped: the backslash "\" character is inserted before the "(" and ")" characters.
See more information about the escaping in the
<out1_list>;<out2_list>;<...>;<out#_list>
Output
I1 I2 I3 I4
0 1 2 3
Escaping section.
107
I5 I6
4 5