Editing An Edid; Creating An Edid - Easy Edid Creator - Lightware UMX-TPS-TX120 User Manual


  
5. Software Control - Lightware Device Controller
5.8.3. Editing an EDID
Select an EDID from Source panel and press the Edit button to display Advanced EDID Editor
window. The editor can read and write all descriptors, which are defined in the standards,
including the additional CEA extensions. Any EDID from the device's memory or a saved
EDID file can be loaded into the editor. The software resolves the raw EDID and displays it as readable
information to the user. All descriptors can be edited, and saved in an EDID file, or uploaded to the User
memory. For more details about EDID Editor please visit our website (www.lightware.com) and download
the EDID Editor Application note. #edid
EDID Editor window
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
5.8.4. Creating an EDID - Easy EDID Creator
Since above mentioned Advanced EDID Editor needs more complex knowledge about
EDID, Lightware introduced a wizard-like interface for fast and easy EDID creation. With
Easy EDID Creator it is possible to create custom EDIDs in four simple steps. By clicking
on the Create button below Source panel, Easy EDID Creator is opened in a new window. For more details about
EDID Editor please visit our website (www.lightware.com) and download the EDID Editor Application
EDID Creator Window
64
note.