8. Firmware Update
8
F irmware Update
The endpoint devices can be updated by using Lightware Device Updater v2 (LDU2) software via Ethernet. The
firmware pack with the necessary components (*.lfp2 file) for your specific product, and the LDU2 application can
be downloaded from the Support page of our website www.lightware.com.
ç Introduction
ç Preparation
ç Running the Software
ç Updating via GUI
ç Command Line Interface (CLI)
ç CLI Commands
ç If the Update is not successful
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
147