Content Of The Backup File - Lightware UMX-TPS-TX120 User Manual


  
11. Appendix
11.3. Content of the Backup File
The backup file contains numerous settings and parameters saved from the device. When the file is uploaded
to a device, the followings will be overwritten:
Analog video input ports (VGA, DVI-A)
Horizontal position, Vertical position, Active horizontal size, Active vertical size, Total horizontal size,
Pixel phase
Test pattern mode, Test pattern resolution, Test pattern color
Digital video input ports (HDMI, DP, DVI-D)
Video port name, Audio port name, HDCP setting
Test pattern mode, Test pattern resolution, Test pattern color
Port name, HDCP mode, HDMI mode, Power +5V mode, Color space setting
Port name, Volume, Balance
Video crosspoint settings, audio crosspoint settings
Autoselect (enable/disable, delay settings, priority list)
Mute/lock state of video ports, Mute/lock state of audio ports
RS-232 mode, Control protocol, Baud rate, Data bits, Stop bits, Parity
Port name and Command Injection (CI) port number
Port status (enable / disable), Code length, Repetition code, Modulation state
Input port name, Output port name
CI status (enable / disable), CI port number
DHCP status (enable / disable), Static IP address, Network mask, Gateway address, LW2/LW3/HTTP port
nr
MAC filter allowlist, Port blocking settings
TCP client settings (/CTRL/TCP)
RS-232 recognizer settings
Cleartext login settings
Device label, Control lock, Dark mode state, Button functions
User presets (U1-U32), User EDID data (U1-U15), Event Manager: settings of all Events (E1-E20)
TPS output port
Analog audio input ports
Crosspoint settings
Serial ports (local and TPS)
IR port
Network settings
Further settings
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
GPIO port configuration (pin 1-7)
Event manager: settings of all Events (E1-E100)
Values of the variables
170