Ethernet Message Sending; Sending A Tcp Message (Ascii-Format); Sending A Tcp Text (Ascii-Format); Sending A Tcp Binary Message (Hex-Format) - Lightware UMX-TPS-TX120 User Manual


  
7. LW3 Programmers' Reference
7.14. Ethernet Message Sending
The device can be used for sending a message to a certain IP:port address. The three different commands
allow controlling the connected (third-party) devices.
7.14.1. Sending a TCP Message (ASCII-format)
The command is for sending a command message in ASCII-format. This method allows escaping the control
characters.
Command and Response
ç CALL·/MEDIA/ETHERNET:tcpMessage(<IP_address>:<port_no>=<message>)
æ mO·/MEDIA/ETHERNET:tcpMessage
Example
ç CALL /MEDIA/ETHERNET:tcpMessage(192.168.0.103:6107=C00)
æ mO /MEDIA/ETHERNET:tcpMessage
The 'C00' message is sent to the indicated IP:port address.
Example with HEX codes
ç CALL /MEDIA/ETHERNET:tcpMessage(192.168.0.20:5555=C00\x0a\x0d)
æ mO /MEDIA/ETHERNET:tcpMessage
The 'C00' message with CrLf (Carriage return and Line feed) is sent to the indicated IP:port address.
The \x sequence indicates the HEXA code; see more information in the
7.14.2. Sending a TCP Text (ASCII-format)
The command is for sending a text message in ASCII-format. This method does not allow escaping or inserting
control characters.
Command and Response
ç CALL·/MEDIA/ETHERNET:tcpText(<IP_address>:<port_no>=<text>)
æ mO·/MEDIA/ETHERNET:tcpText
Example
ç CALL /MEDIA/ETHERNET:tcpText(192.168.0.103:6107=pwr_on)
æ mO /MEDIA/ETHERNET:tcpText
The 'pwr_on' text is sent to the indicated IP:port address.
Escaping section.
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
7.14.3. Sending a TCP Binary Message (HEX-format)
The command is for sending a binary message in Hexadecimal format. This method does not require escaping
the control and non-printable characters.
Command and Response
ç CALL·/MEDIA/ETHERNET.tcpBinary(<IP_address>:<port_no>=<HEX_message>)
æ mO·/MEDIA/ETHERNET:tcpBinary
Example
ç CALL /MEDIA/ETHERNET:tcpBinary(192.168.0.103:6107=0100000061620000cdcc2c40)
æ mO /MEDIA/ETHERNET:tcpBinary
The '0100000061620000cdcc2c40' message is sent to the indicated IP:port address.
INFO:
There is no need to insert a space or other separator character between the binary messages.
7.14.4. Sending a UDP Message (ASCII-format)
The command is for sending a UDP message in ASCII-format. This method allows escaping the control characters.
Command and Response
ç CALL·/MEDIA/ETHERNET:udpMessage(<IP_address>:<port_no>=<message>)
æ mO·/MEDIA/ETHERNET:udpMessage
Example
ç CALL /MEDIA/ETHERNET:udpMessage(192.168.0.103:6107=C00)
æ mO /MEDIA/ETHERNET:udpMessage
The 'C00' message is sent to the indicated IP:port address.
Example with HEX codes
ç CALL /MEDIA/ETHERNET:udpMessage(192.168.0.20:9988=C00\x0a\x0d)
æ mO /MEDIA/ETHERNET:udpMessage
The 'C00' message with CrLf (Carriage return and Line feed) is sent to the indicated IP:port address. The \x
sequence indicates the HEXA code; see more information in the
125
Escaping section.