Front Panel Lcd Menu Operations; Introduction; Menu Navigation; Operation Mode Visualization - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     

5. Front Panel LCD Menu Operations

5. Front Panel LCD Menu Operations
5
F ront Panel LCD Menu Operations
This chapter is about the operating of the device describing the functions
which are available by the front panel controls:
ç Introduction
ç The Tree Structure of the LCD Menu
ç Ports Menu - Transmitter Mode
ç Ports Menu - Receiver Mode
ç Ports Menu - Transceiver Mode
ç EDID Menu
ç System Status Menu
ç System Settings Menu
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
5.1. Introduction
5.1.1. Menu Navigation
The front panel has a color LCD that shows the most important
settings and parameters structured in a menu. The jog dial
control knob can be used to navigate between the menu items
or change the value of a parameter. The knob can be pressed to
enter a menu or edit/set a parameter.
TIPS AND TRICKS:
The faster you rotate the jog dial, the
faster the parameter list is scrolled.
5.1.2. Operation Mode Visualization
The current operation mode of the UBEX endpoint is displayed with two methods on the LCD screen for the
easier recognition:
▪ The color of the header is blue for the transmitter, white for the receiver, and black with a white stripe for
the transceiver;
▪ There is a TX, RX or TRX label in the main menu of the menu structure.
Main menu of the transmitter Main menu of the receiver
5.1.3. Parameter Selection
The blue colored line means the selected menu/parameter, the
the current setting.
48 48

Menu navigation

Menu selection
& change parameter & set parameter
Press
Turn
Main menu of the transceiver
green one means