Installation Of Drive System Parts (Drive System 04) - ABB IRC5 Product Manual

2 Installation and Commissioning, IRC5

2.9.3. Installation of Drive system parts (Drive System 04)

2.9.3. Installation of Drive system parts (Drive System 04)
Location
The illustration below shows the location of the drive system in a Single Cabinet Controller,
in a Dual Cabinet Controller the drive system components are located in the Drive Module.
xx0500001858
A
B
C
D
E
F
Required equipment
A number of choices are
available
Standard toolkit
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Application manual - Additional
axes and stand alone controller
Circuit Diagram
114
Operator's panel
Capacitor
Computer unit
Panel unit
Axis computer
Drive units/Rectifier
Equipment Art. no. Note
Specified in section
of Drive System 04, IRC5 on page
91.
The contents are defined in
section Standard toolkit.
These procedures include
references to the tools required.
3HAC021395-001 Contains information on how to
configure the system for
additional axes.
See
Configuration
Circuit Diagram on page 319
Continues on next page
3HAC021313-001 Revision: P