Replacement Of Contactor Interface Board - ABB IRC5 Product Manual

4 Repair activities, controller IRC5

4.23. Replacement of Contactor Interface Board

4.23. Replacement of Contactor Interface Board
Location
The contactor interface board is located on the left wall in the Single Cabinet Controller.
In the Dual Cabinet Controller the contactor interface board is located on the left wall in the
Drive Module.
xx0400001058
A
B
C
D
E
Required equipment
Contactor Interface board
Standard toolkit
Other tools and procedures may be required. See
references to these procedures in the step-by-step
instructions below.
Circuit Board
252
A
MOTOR ON contactor K42
MOTOR ON contactor K43
Brake contactor
Jumpers (3pcs)
Contactor interface board
Equipment
B
C
D
E
Note
DSQC 611
See Controller system parts (Drive
System 04) on page
The contents are defined in section
Standard toolkit!
These procedures include references
to the tools required.
See Circuit Diagram on page
3HAC021313-001 Revision: P
301.
319.
Continues on next page