ABB IRC5 Product Manual page 259

Refitting
The following procedures details how to refit the drive system fan.
3HAC021313-001 Revision: P
Action
1.
DANGER!
Before commencing any work inside the
cabinet, please observe the safety
information in section DANGER - Make
sure that the main power has been
switched off! on page 30.
2. Reconnect the connector to the fan.
3. Refit the fan by placing the attachments in
the back of the fan housing in the grooves.
4. Refit the cover and the attachment
screws.
5. Refit the moist dust filter magazine.
(Option)
4 Repair activities, controller IRC5
4.24. Replacement of drive system fans
Note/illustration
xx0500002015
• A: fan
• B: attachments
• C: grooves
How to refit the moist dust filter magazine
is detailed in section Replacement of moist
dust filter on page 171.
Continued
257