2 Installation and Commissioning, IRC5
2.9.9. Installation of cooling fan harness axis 1 and 2
Continued
138
Action
5. Route the cable to the left and connect the harness
connectors to the contactor interface board.
•
A43.X11 to X11
•
A43.X10 to X10
6. Route the wires with terminals to be mounted on the
cabinet door inside the cable protection according to
the illustration.
7. Fit the snap locking terminals to the plate on the
cabinet door according to the illustration.
Note/Illustration
xx0500002690
See
Locations in Single Cabinet
Controller on page
135.
See
Locations in Single Cabinet
Controller on page
135.
xx0600002693
A. XT8/8.1
B. XT8/8.2
C. XP58.2
D. XP58.1
See
Locations in Single Cabinet
Controller on page
135.
3HAC021313-001 Revision: P