ABB IRC5 Product Manual page 195

Removal of control system fan
The procedure below details how to remove the control system fan.
3HAC021313-001 Revision: P
Action
1.
DANGER!
Before commencing any work
inside the cabinet, please
observe the safety information
in section DANGER - Make
sure that the main power has
been switched off! on page
2. Remove the attachment screws
on the top cover.
3. Remove the top cover.
4. Disconnect the connector to the
fan.
5. Remove the screw (item B in
image below).
4 Repair activities, controller IRC5
4.6. Replacement of control system fan
Note/Illustration
30.
xx0700000416
• A: fan
• B: top cover
• C: attachment screws (4 pcs)
Continued
Continues on next page
193