Replacement Of Ethernet Switch - ABB IRC5 Product Manual

4 Repair activities, controller IRC5

4.28. Replacement of Ethernet switch

4.28. Replacement of Ethernet switch
About the Ethernet switch
An Ethernet switch is mounted in the controller cabinet if option DispensePac support is
used.
Location
The illustration below shows the location of the Ethernet switch.
xx0600002681
B
Removing the switch
270
Ethernet switch
Action
1.
DANGER!
Before commencing any work inside the cabinet, please observe the safety information
in section DANGER - Make sure that the main power has been switched off! on page
2.
esd
WARNING!
The unit is sensitive to ESD. Before handling the unit please read the safety information
in the section WARNING - The unit is sensitive to ESD! on page 31
3. Disconnect all connectors from the switch.
4. Pull the spring lock to remove the switch.
Continues on next page
3HAC021313-001 Revision: P
30.