2500 Series - Micromeritics ASAP 2460 Operator's Manual

Appendix B
2498- The requested change to the Sample's status is invalid at this time.
Cause:
Action:
2499- Sequence number must contain at least 3 digits.
Cause:
Action:

2500 Series

2500- All sample file names that can be created using the sequence number pattern
already exist. You may want to modify the next sequence number.
Cause:
Action:
2501- System resources have reached a dangerously low level. Please close some
windows to avoid the loss of data.
Cause:
Action:
2505- Error Logger cannot be initialized! Error code (number). Program will exit.
Cause:
B-10
A request to change the file's status (for example, from automatically
collected to manually entered) could not be done.
Contact your service representative if you continue to receive this error
message. Record the name of the sample file in which the problem
occurred.
You tried to enter a sequence number that did not contain at least three
digits.
Enter a sequence number that contains at least three digits.
No more sample information files can be created using the currently
entered file name sequence number.
Select Options > Sample Defaults from the Main Menu and enter a
new sequence number.
A large number of windows are open and consuming the system
resources available to all applications.
Close one or more windows on the screen. Contact your service rep-
resentative if you continue to receive this error message.
An internal processing and/or hardware error has occurred.
ASAP 2460 Operator's Manual
246-42800-01 - Dec 2013