2500 Series - Micromeritics TriStar II 3020 Operator's Manual

Appendix B

2500 Series

2500- All sample file names that can be created using the sequence number pattern
already exist. You may want to modify the next sequence number.
Cause:
Action:
2501- System resources have reached a dangerously low level. Please close some
windows to avoid the loss of data.
Cause:
Action:
2505- Error logger cannot be initialized. Error code [n]. Program will exit.
Cause:
Action:
2506- Sample file [file name] has a 'No Analysis' status and cannot be used for this
operation
Cause:
Action:
2507- The sample has an invalid status and cannot be used for degassing.
Cause:
Action:
2513- Unable to read the calibration file [file name].
Cause:
Action:
B-10
No more sample information files can be created using the currently
entered file name sequence number.
Select Options > Sample defaults and enter another sequence
number.
A large number of windows are open and consuming the system
resources available to all applications.
Close one or more windows on the screen. Contact a Micromeritics
service representative if this error message continues.
An internal processing error has occurred.
Contact a Micromeritics service representative if this error message
continues.
The selected sample file does not have collected data and cannot be
used for operations, for example, reporting.
Enter the name of a file with a status of Complete, Analyzing or
Entered or select a sample file from the list box.
A sample file has been selected which does not have a No Analysis or
Prepared status.
Select a different file with a status of No Analysis or Prepared.
An invalid calibration file was selected or one that cannot be read.
Ensure the media containing the calibration file has no problems.
TriStar II 3020
302-42828-01 - Dec 2013