Unit Configuration - Planmeca Proline XC Technical Manual

SERVICE SETTINGS

2.7 Unit configuration

Technical Manual
The equipment software has been equipped with the functions needed for cephalostatic oper-
ation. In the configuration mode it is determined whether the equipment is equipped with a
cephalostat.
Select either ON (unit with cephalostat) or OFF (unit without cephalostat). Restart the X-ray
unit after changing the status.
Film X-ray units: If the X-ray unit is equipped with AEC function, select AEC ON.
Chapter B - GRAPHIC USER INTERFACE
Planmeca Proline XC X-ray unit B-15