Panoramic X-Ray Beam Adjustment; Removing And Attaching The Fixed Sensor Head - Planmeca Proline XC Technical Manual

Chapter E - DIMAX3 DIGITAL SYSTEM ADJUSTMENT

2 PANORAMIC X-RAY BEAM ADJUSTMENT

NOTE Switch the unit off after all the checks and adjustments have been performed, before
taking any patient exposures.
2.1

Removing and attaching the fixed sensor head

Removing the sensor head
Unscrew the bottom cover plate attachment screw with the 4mm allen key and remove the
cover plate.
Figure 8
E-4 Planmeca Proline XC X-ray unit
PANORAMIC X-RAY BEAM ADJUSTMENT
Technical Manual