Planmeca Proline XC Technical Manual page 12

Chapter A - GENERAL & TECHNICAL DATA
Mechanical data
Weight
Dimensions
Color
Environmental requirements
Ambient temperature
Humidity
Dimax3 digital X-ray system
CCD pixel size
Image pixel size
Image size
Sensor active area size
Image field
External mains fuse recommendation
The recommendation for the external mains fuses are:
•
•
No other equipment should be connected to the same fused mains line as the X-ray unit. In
some countries an additional external fault current guard is also required.
Manufacturer
PLANMECA Oy, Asentajankatu 6, FIN-00880 Helsinki, FINLAND
phone: +358-20-7795 500
A-4 Planmeca Proline XC X-ray unit
units with 100 - 132 V~ voltage setting:
units with 180 - 240 V~ voltage setting:
Panoramic:108 kg / 238 lbs
Pan/ceph 126 kg / 278 lbs
(HxDxW) 2200x930x890 mm, 86.6x36.6x35 inch
RAL 9002
Operating +5°C to +40°C
Storage -10°C to +50°C (film X-ray unit)
0°C to +50°C (Dimax3 digital X-ray system)
25% - 75%
33 μm
130 μm normal resolution
99 μm enhanced resolution/
66 μm high resolution
2144x1032 pixels normal resolution
2860x1376 pixels enhanced resolution
4288x2064 pixels high resolution
Pan 9 x 136 mm
Ceph 9 x 230 mm
Panoramic 14 x 30 cm (5.5 x 12 in.)
Cephalometric 22.5 x 30 cm (9 x 12 in.)
TECHNICAL SPECIFICATIONS
16A, time lag
8A, time lag
Technical Manual