Sound Tone; Select Language - Planmeca Proline XC Technical Manual

USER PREFERENCE SETTINGS

1.3 Sound tone

1.4 Select language

Technical Manual
From the list of User preference settings select Sound tone . The display shown below
appears. When an X-ray exposure is taken you will hear a warning tone indicating that radia-
tion is being generated.
If the warning sound of the radiation cannot be heard or is considered too loud, the tone (and
loudness) can be adjusted. Adjust the tone higher with the up arrow field and adjust the tone
lower with the down arrow field.
Touch the OK field to accept the new tone and exit the mode.
The language of the Graphic user interface (GUI) can be selected on the Select language
display.
Touch the OK field to accept the new language and exit the mode, or exit the mode without
changing the language by touching the Cancel field.
Chapter B - GRAPHIC USER INTERFACE
Planmeca Proline XC X-ray unit B-5