Parameter History; Autoprint Settings (Film X-Ray Units) - Planmeca Proline XC Technical Manual

Chapter B - GRAPHIC USER INTERFACE

1.5 Parameter history

The parameters of the 25 previously taken exposures are stored into the memory of the
equipment and can be examined or taken into use if desired. Use the arrow fields to scroll the
parameters. Take the parameters shown into use and exit to normal mode by touching the
OK field. Exit without taking the parameters into use by touching the Cancel field.
All displayed parameters indicate the parameters selected during the specific exposure.
If fewer than 25 exposures have been taken, the history only shows the number of exposures
taken.
NOTE The parameter history list can be cleared on the Factory preset window by touching the
Exposure counter button.

1.6 Autoprint settings (film X-ray units)

In the Autoprint settings mode the film viewing side and the date format can be changed. The
film can be viewed from either side depending upon which way round the dentist likes to
examine the image on the film. You can set the text to appear the right way round on the pre-
ferred viewing side with the Mode field.
•
B-6 Planmeca Proline XC X-ray unit
In the ISO/FDI orientation the image appearing on the film is a view of the patient's teeth
USER PREFERENCE SETTINGS
Technical Manual