Bluetooth Interface; Outlined Specifications - Toshiba B-EP Series Interface Specification

3.7 BLUETOOTH INTERFACE

3.7.1

OUTLINED SPECIFICATIONS

Communication method
Supported profile
Communication class
Communication distance
Service name
Device nickname
Factory default setting:
Flow control
Operation mode
PIN code
Receive buffer
Link break time out
Inquiry control
Factory default setting:
SR mode and timer setting
value at page/inquiry scanning
Factory default setting:
Device class
SSP authentication type
Factory default setting
* Although the SR mode of the printer is R2, that of the host is not necessarily R2.
Connectivity depends on the situation. When the clock of the host is already synchronized
with the printer (for example, after an inquiry is made or a connection has been once
established after a power on), the highest connectivity is obtained by setting R2 in the SR
mode of the host.
connectivity will become the best when SR mode of the host is set to R0.
* SSP (Secure Simple Pairing) is a simplified pairing process supported from the B-EP-GH32,
which requires no manual entry of PIN code.
Item
Bluetooth V1.2 (with logo
None (Not supported)
None
When the host's clock is not synchronized with the printer, the
B-EP-GH30/TH30
certification)
Serial port profile
Class 2
3 m/360°
Serial Port Profile 1
Programmable
TOSHIBA TEC BT
Credit based flow control
Slave mode
Available
Dynamic allocation
Programmable
Response is made at any time.
SR mode: R2 *
The timer is programmable.
Scan interval = 1.28 sec.
Scan window = 22.5 msec.
Major Device Class = Imaging
Minor Device Class = Printer
3-54
CHAPTER 3 INTERFACE
B-EP-GH32
Bluetooth V2.1 + EDR (with
logo certification)
SSP Dev
20 sec.
Selectable from the following
four types:
▪ Just Works
▪ Numeric Comparison (No Input
No Output)
▪ Numeric Comparison (Display
Only)
▪ Numeric Comparison (Display
YesNo)
Just Works
B-EP Series