Toshiba B-EP Series Interface Specification page 499

7.5.14 CHARACTER ROTATE COMMAND
Function Specifies the rotational angle of characters.
Format [ESC] Rn
Initial value n: 0
Term n: Rotational angle of characters
Explanation (1) When "n" is set to any value other than the above, a command error occurs.
(2) The characters are rotated as shown below:
* When characters are rotated, they are not aligned to the reference line, because
0: 0°
1: 90°
2: 180°
3: 270°
0°
each font has a different parameter for the print position.
magnification is changed, they are not aligned to the reference line either.
CHAPTER 7 RECEIPT MODE (INTERFACE COMMANDS)
[ESC] R
90° 180°
Origin
7-30
B-EP Series
270°
If the character