LCD Message of the
No.
Upper Line
(English)
BT Initializing
29
SSP AUTH FAILED
30
*1 LABEL mode only (when connected through the RS-232C, IrCOMM or Bluetooth interface)
*2 No. 30: "SSP AUTH FAILED" is displayed only when the printer model is B-EP-GH32 and SSP
authentication type is set to "Display Only" or "Display Yes/No" of Numeric Comparison.
BD address and bonding information are being
registered.
*2
Bluetooth pairing failed. (This message is displayed
when SSP authentication is rejected by the host.)
Printer Status
11-15
CHAPTER 11 OTHER FUNCTIONS
B-EP Series
Detail Status
Auto Status
Status Request
Transmission
Command
00H
"00"