Toshiba B-EP Series Interface Specification page 240

qq: No. of digits after zero suppression
(Omissible. If omitted, zero suppression is not performed.)
00 to 20
* Reserved in the case of the compatible mode for the B-SP series
sss ------ sss: Data string to be printed (Omissible)
Max. 126 digits.
However, the number of digits varies according to the type of barcode.
tt , tt , tt ------ , tt :
1 2 3 20
* Omissible parameters (such as "Increment/decrement," "Selection of print or non-
print of numerals under bars" and "No. of digits after zero suppression") cannot be set
when the Customer barcode, POSTNET, RM4SCC or KIX CODE is selected.
* WPC is the generic name for barcodes of JAN, EAN and UPC.
* In the above descriptions, "Customer barcode" includes the highest priority customer
barcode.
* When the key operation is used to enable the compatible mode for the B-SP series,
EAN128 is printed. When the compatible mode for the B-SP series is disabled,
UCC/EAN128 is printed.
CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
Link field No. (Omissible)
01 to 99 (1 to 99 can also be used.)
Up to 20 fields can be designated using commas.
5-70
B-EP Series