Toshiba B-EP Series Interface Specification page 243

(5) Bar width, space width, and character-to-character space
Designate the bar, space and character-to-character space widths according to the type
of barcode.
barcode, type, number of digits, print speed, paper used, etc.
designations are listed below.
In the case of JAN, EAN, UPC, CODE93, CODE128, UCC/EAN128 or EAN128, the width
of 2 to 6 modules is automatically calculated by designating a 1-module width.
[Example of setting]
203-dpi print head (1 dot = 1/8 mm)
Type of barcode
JAN, EAN, UPC
CODE93
CODE128,
UCC/EAN128,
EAN128
Values to be set in ff: "1-module width"
[Customer barcode]
1-module width
Note that the proper value differs according to the rotational angle of
1 module 2 modules 3 modules 4 modules 5 modules 6 modules
Bar Space Bar Space Bar Space Bar Space Bar Space Bar Space
3 6
2 4
2 4
5-73
CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
9 12
6 8
6 8
To be automatically calculated based
on the value set in ff: "1-module width"
B-EP Series
Examples of such
- -
- -
- -